top of page

Dimensions (transport position): 32-1/2" wide x 38" tall x 70" long
Weight: 245 Pounds ( 2 can lift into a flatbed)
Tires: Pneumatic, 4-ply, Tubeless, Turf tread, 16 oz. Stop-leak in each tire
Maximum speed: 3 miles/hour (264 feet/minute)
Maximum load limit: 900 pounds
Frame: Welded Structural Steel
Engine: Echo EA-410, 42.7 cc, 2 Stroke, recoil start, chainsaw mix
Drive: Automatic Clutch, Variable Speed
Brake: Hand Brake with Park Position Lock
Throttle: Pressure Sensitive Finger Throttle

Little Helper Cart-Next Batch Shipping June 2024

SKU: LHC1000
Expected to ship at beginning of June 2024
    The machine can be loaded in the upright position (best for heavy pieces) or in the recumbent (transport) position for lighter items. An extendable arm stabilizes the machine in the upright position.
    The front wheels are free-turning on roller bearings. The rear wheels are driven by a solid shaft mounted on heavy duty bearing blocks. The solid drive gives the machine stability when driving on ramps. Steering is accomplished by lifting slightly on the handle and rotating the machine. This steering motion can be accomplished easily, due to the load being centered over the wheel base for good balance, even with heavy loads. The short wheel base distance of 14 inches further simplifies the steering process. There is no reverse drive gear. The machine can be hand pulled backwards or simply turned around by the above-described steering method. A hand brake is there to aid in stopping and for transport, just in case.

  • White Facebook Icon
  • White Twitter Icon
  • White Instagram Icon
bottom of page